Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Roofers in Bloomington, CA
Roof inspection in Bloomington is the smartest first call a homeowner can make, because most of the roofs in this city are 50 to 70 years old and they don’t fail the way newer pitched roofs do. Here, the failure starts at a lifted seam, a rusted edge, or a chalky foam coating that’s lost its UV protection years before you see water on the ceiling. Hawk Roof Repair has served Bloomington since 2017 with an inspection-first approach: we document what’s happening on your roof before anyone talks repair or replacement. Call (877) 731-1384 to schedule yours.
Why Bloomington Homes Are Different
Bloomington is one of the last pockets of the Inland Empire where low-slope, flat-roof tract homes from the 1950s through the 1970s still dominate entire streets. That matters because those original built-up tar-and-gravel roofs, and the sprayed polyurethane foam systems applied over them in the 1980s and 1990s, are now reaching end of life at the same time. The dry, wind-scoured Santa Ana corridor means these aging roofs fail at seams and flashings long before the field membrane gives out. We see wind-lifted seams on the windward side of homes near the Cajon Pass corridor all the time. Foam roofs here often need recoating every 5 to 7 years, not the 10 to 15 you’ll hear quoted in cooler coastal markets. UV exposure is brutal in Bloomington: summer highs routinely top 100 degrees, and that heat bakes coatings until they chalk and crack. A smaller stock of 1980s and 1990s tile roofs on newer infill lots has its own issues, mostly cracked tiles and failed underlayment at valleys. The upshot is that flashing and edge-metal work is the signature skill of a Bloomington roofer, not an afterthought.
Styles & brands we work with
Our Main Bloomington Services
Bloomington homeowners call us most often about two things: repairing wind and UV damage on aging flat roofs, and replacing roofs that have simply reached the end of their design life. Here’s how each works here.
Roof Repair in Bloomington
Repair on a Bloomington flat roof usually means re-securing a lifted seam, replacing a rusted drip edge, patching a foam coating that’s cracked and let water into the underlying felt, or rebuilding a flashing detail around a swamp cooler or vent. The wind here doesn’t just age roofs: it finds the weakest seam and works it loose over a single season. We inspect first, document what we find, and scope the repair so you know exactly what’s getting fixed before we start. Roof Repair in Bloomington is covered on its own page with local pricing and the signs we look for.
Roof Replacement in Bloomington
Replacement in Bloomington is as much about tearing off and rebuilding old built-up and foam systems as it is about putting new material on. Many of these roofs have layers: original tar-and-gravel, then a foam coat, then a patch on the patch. A proper replacement means a full tear-off to the deck, a check of the sheathing beneath, and a new system chosen for the home, not for a supplier relationship. Roof Replacement in Bloomington walks through material options, timing, and what a fair price looks like in this market.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Roof Inspection in Bloomington
A Roof Inspection in Bloomington is the only way to catch a wind-lifted seam or a chalky foam coating before it becomes a leak over your living room. On the flat-roofed tracts that define this city, the first sign of trouble is rarely water on the ceiling. It’s a rusted metal edge on the windward side, or a seam that’s starting to peel, or a foam surface that’s lost its color and turned powdery under 100-degree summer sun. We inspect first. Every time. No ladder-top sales pitch.
Roof Inspection Services
Signs you need it
Your roof is over 15 years old, you’ve spotted a rusted edge or lifted seam from the ground, or the foam coating looks chalky and faded.
What it costs in Bloomington
A standalone roof inspection in Bloomington typically runs $200 to $450 depending on roof size and access.
How we do it
We walk every slope, valley, and seam, document what we find with photos, and hand you a written condition report before we ever talk repair or replacement.
Free Roof Inspection
Signs you need it
You’ve noticed a ceiling stain, missing granules in the gutter, or you’re not sure how old the roof actually is.
What it costs in Bloomington
Free roof inspections are offered on a limited basis; call (877) 731-1384 to check current availability.
How we do it
We do a visual assessment of the roof surface, flashings, and edges, then tell you straight whether a full documented inspection is worth the money.
Hail Damage Roof
Signs you need it
You’ve had hail in the last 12 months and you can see dents in the foam coating or spatter marks on vents and flashings.
What it costs in Bloomington
A hail-focused inspection runs $200 to $450 as a standalone service.
How we do it
We map the damage, mark the affected areas, and give you a written report you can take to your insurer with confidence.
Roof Estimate
Signs you need it
You’re weighing repair against replacement and need a number, not a sales pitch.
What it costs in Bloomington
A written repair estimate is typically free when scoped from a documented inspection; replacement estimates are free.
How we do it
We price the work from the inspection findings and material choice, so the estimate reflects your actual roof, not a generic square-footage guess.
What Roof Inspection Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Standalone roof inspection (documented, written report) | $200 – $450 |
| Hail-focused inspection | $200 – $450 |
| Inspection rolled into a repair or replacement scope | Free with approved work |
How long does a roof inspection take in Bloomington?
A full documented inspection takes about an hour on a typical single-story Bloomington flat roof. Larger or multi-level homes run longer. Call (877) 731-1384 to schedule a time that works for you.
Will I get a written report from a Bloomington roof inspection?
Yes. Every inspection ends with a written condition report and photos. You’ll know what’s failing, what’s marginal, and what’s fine. Estimates are free when work follows.
Brands We Service in Bloomington
We work with seven leading shingle and roofing material brands, including GAF, Atlas, and Tamko, so your replacement is matched to your home’s aesthetic and your budget, not to whatever we happen to stock. See our brands for the full line. Parts and materials are sourced locally where possible, which keeps turnaround tight on Bloomington jobs.
See the difference
Before
After
Before
After
Before
AfterPricing for Roofers in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Standalone roof inspection | $200 – $450 |
| Hail-focused inspection | $200 – $450 |
| Minor repair (small seam, flashing, or edge fix) | $350 – $650 |
| Foam roof recoat (per 1,000 sq ft) | $1,500 – $3,500 |
| Full built-up roof replacement (per 1,000 sq ft) | $8,000 – $12,000 |
| Foam roof full replacement (per 1,000 sq ft) | $10,000 – $15,000 |
| Tile roof repair (cracked tiles, underlayment at valleys) | $500 – $1,200 |
| Tile roof replacement (per 1,000 sq ft) | $12,000 – $18,000 |
| Flashing and edge-metal replacement (per linear foot) | $15 – $30 |
What pushes price up in Bloomington is access and layering. Homes with multiple roof levels, steep access, or roofs with three or four layers of old material take longer to tear off and cost more before a single new board goes down. We quote fixed prices with no change orders once the inspection is done, so the number you approve is the number you pay.
Neighborhoods We Serve in Bloomington
We cover the entire 92316 ZIP code, from the older tract streets near the Santa Ana River wash to the newer infill lots on the east side. Response time for a scheduled inspection across Bloomington is typically within a few business days.
- Sunny Sands tract
- Crestmore area
- Bloomington proper, west of Cedar Avenue
- East Bloomington infill lots
- Streets along the Santa Ana River corridor
Service Area – Cities Near Bloomington
Hawk Roof Repair also covers the surrounding Inland Empire communities. If you’re in Fontana, CA, Rialto, CA, Glen Avon, CA, or Pedley, CA, the same inspection-first, multi-brand approach applies. Bloomington clients get the same crew and the same straight diagnosis whether the job is in 92316 or just over the city line.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roofers in Bloomington
Most full roof replacements in Bloomington require a permit, and we pull them ourselves as part of the job. Repairs that don’t change the roof system usually don’t. We’ll tell you which applies to your roof during the inspection.
We schedule inspections within a few business days across the 92316 ZIP code. If you’ve got an active leak, call (877) 731-1384 and we’ll tell you the first available slot and how to protect the interior in the meantime.
Yes. The housing stock here runs from 1950s built-up and foam flat roofs to 1980s and 1990s tile on infill lots. We inspect, repair, and replace both, and the inspection will tell you which system you actually have before anyone quotes a number.
Call (877) 731-1384 to schedule your free estimate in Bloomington. We’ll inspect first, document what we find, and give you a straight number.
What happens when you call
- 1A real person answersNo phone trees — talk to a local roofing pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"Quality work on the repair. There were a few nails left in the driveway that the magnet missed, so check yours before driving over it. Otherwise no complaints."
— Maria Hernandez"Flashing where the roof meets the chimney had never been done right by the original builder. He rebuilt it properly with step flashing instead of just running a bead of caulk over it like the last two people did."
— Jodi Walsh"Went up in the attic first with a flashlight before going on the roof, which no other estimator bothered to do. Found the stain and worked backward from there."
— Diego Torres