Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Highland
Roof replacement in Highland, CA means dealing with the wind before the rain. A typical asphalt shingle roof replacement here runs $8,500 to $16,500 for a standard single-story tract home, with architectural shingles landing between $11,000 and $18,000 depending on square footage and decking condition. We’re Hawk Roof Repair, led by Noel Ibarra, and we’ve spent enough time on ladders in the 92346 ZIP code to know exactly where Highland roofs fail first: ridge lines, gable ends, and north-facing slopes. Call (877) 731-1384 for a free replacement estimate, and we’ll walk your roof with you before any numbers are discussed.
Why Hawk Roof Repair Is Highland’s Preferred Roof Replacement Company
Highland homeowners call us because we inspect before we quote. That’s not a slogan, it’s the sequence: a standalone roof inspection documents exactly what’s failing, then a replacement conversation starts from that written scope. No one stands on your ridge selling you shingles you don’t need yet. Noel Ibarra built the company on that inspection-first discipline, and it matters in Highland more than most places, because wind damage here hides in spots a casual walkover misses: lifted ridge caps, creased shingles at gable ends, underlayment tears at the eave line.
We also bring material choice that single-brand roofers can’t. We install from seven manufacturers, GAF, CertainTeed, Owens Corning, IKO, Atlas, and Tamko among them. That means if you want GAF architectural shingles with a wind-rated starter strip, we spec that. If your budget points toward Tamko or Atlas equivalents, we build the quote around that instead. The roof dictates the material, not the other way around.
Highland’s housing stock runs from 1950s tract homes to 2000s stucco builds with concrete tile, so one-size roofing advice fails here. We’ve re-roofed homes off Baseline in east Highland, up against the foothills on the north side, and through the older grid near Victoria Avenue. Different failure modes, different decking conditions, same approach: document, scope, replace with the right material.
Styles & brands we work with
Asphalt Shingle Roof Replacement in Highland
Asphalt Shingle Roof Replacement in Highland means tearing off what the wind has spent years working on. Most Highland homes built between the 1950s and 1980s wear asphalt shingles, and plenty of those roofs are now on their second or third layer. A second layer hides what the first layer lost, creased shingles, lifted tabs, granule loss down to bare mat, and once we strip to the sheathing, we often find decking that was never spaced for today’s code. That’s where replacement becomes more than swap-and-go.
A full tear-off and asphalt shingle replacement in Highland typically runs $8,500 to $16,500 on a standard single-story tract home. Architectural shingles run higher, $11,000 to $18,000, because they’re thicker, wind-rated higher, and install with a starter strip and ridge cap system that matters at 60 mph gusts. Three-tab shingles cost less upfront but fail faster in the Cajon Pass corridor. We’ll show you both options and let the wind history of your particular street guide the recommendation.
Stripping to the Sheathing
In older Highland homes, the first tear-off reveals what the last installer covered up. We’ve pulled multiple layers off homes near Baseline and found soft spots at the eaves, underspaced decking from the original build, and ridge boards that had been flexing in Santa Ana winds for years. The right replacement strips everything, addresses the sheathing, and starts clean.
Wind-Rated Installation Details
Highland replacement work that skips the wind details fails early. We install fully nailed starter strips, add ice and water shield at valleys and penetrations, and use ridge cap shingles rated for high-wind exposure. These are the differences between a roof that survives the next Santa Ana event and one that shreds at the ridgeline within two years.
New Roof Installation in Highland
New Roof Installation in Highland is where the wind corridor and the local housing stock actually work in our favor, because we get to build the roof correctly from the first layer. For new construction and full teardown rebuilds, we install the same seven-brand material lineup, GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, spec’d for Highland’s specific wind uplift and ember intrusion risk.
New installation on a Highland home, whether it’s a 2000s stucco build with concrete tile or a 1960s tract house getting its first proper decking job, typically runs $14,000 to $24,000 depending on complexity, pitch, and material choice. The permitting process for new roof installation in the 92346 ZIP code requires structural verification on some 2000s-era concrete tile homes, because the original tile load was never fully accounted for. We handle the permit paperwork and the structural conversation directly.
The Permit Conversation
New roof work in Highland runs through city permitting, and the permit triggers code requirements that older homes weren’t built to meet. We walk you through those upgrades, roof decking thickness, ventilation ratios, fire-rated underlayment, and price each item before the permit is pulled. The quote you sign matches the permit we submit, no surprise code-upgrade invoices after the fact.
Ember-Resistant Assemblies
New roof installations in Highland should be built to Class A fire-rated standards even when code doesn’t force it. The wildland fire risk off the foothills, combined with Santa Ana wind events, means ember intrusion through vents and gaps is the real threat. We install ember-resistant vent assemblies and Class A materials as standard practice, not as an upsell.
Trusted Brands We Service in Highland
We’re not tied to one shingle manufacturer, which matters in Highland where wind performance varies by product line. We work with seven major brands: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That range means we can match an existing roof’s aesthetic on a partial replacement, or spec a GAF architectural shingle with a high wind warranty for the east-side wind corridor near Baseline, without forcing a brand you didn’t choose. We keep common Highland material specifications stocked locally so replacement work doesn’t stall waiting on supply. Visit our Roof Replacement page to see the full material lineup and what each brand offers for wind-rated assemblies.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Highland Homes
- Santa Ana wind creasing at ridges and gable ends. The Cajon Pass funnels gusts over 60 mph through east Highland, and shingles crease or lift exactly where the roof profile changes. Once a ridge cap lifts, the decking underneath takes water within a single rain event.
- Multiple shingle layers hiding soft decking. Homes built in the 1950s to 1980s often received a second or third shingle layer instead of a proper tear-off. Stripping those layers exposes under-spaced decking, soft spots at the eaves, and framing that never met current sheathing code.
- Concrete tile on 2000s stucco homes without structural verification. Many 2000s-era Highland homes have concrete tile roofs that were installed without confirming the truss load. Re-roofing those homes means structural verification before any new material goes on, and cracked underlayment is common once tile comes off.
- Granule loss on north-facing slopes near the foothills. The north side of Highland, closer to the San Bernardino foothills, gets intense afternoon sun exposure. North slopes show bare mat and granule loss faster than the rest of the roof, creating a patchwork failure that complete replacement often resolves.
Pricing for Roof Replacement in Highland, CA
Asphalt shingle replacement in Highland runs $8,500 to $16,500 for a standard single-story home. Architectural shingles run $11,000 to $18,000, and new roof installation on more complex homes runs $14,000 to $24,000. Square footage drives the base price, but Highland-specific factors move the number: wind-rated underlayment, decking replacement if the sheathing is under-spaced, and structural verification on concrete tile homes. We give written line-item quotes before work starts, and any decking or structural issue found during tear-off gets priced and approved in writing before we touch it. Call (877) 731-1384 to schedule a free estimate, and we’ll give you real numbers for your roof and your street.
We Also Serve Cities Near Highland
Our Roof Replacement in Highland team also covers the cities around the corridor: San Bernardino, Muscoy, Redlands, and Loma Linda. If you’re in a neighboring city and dealing with the same wind and wildfire risk from the Cajon Pass, the same inspection-first approach applies.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Highland
A standard single-story Highland tract home from the 1950s-1980s runs 20 to 28 squares, while 2000s stucco homes with concrete tile run 30 to 40 squares. You need the square count to compare bids fairly, because roofers price by the square, plus decking and accessories. We measure your roof during the free estimate and give you the exact square count in writing. Call (877) 731-1384 and we’ll walk the roof with you and put the numbers on paper.
Yes. A re-roof permit in Highland triggers current building code for decking thickness, ventilation ratios, and fire-rated underlayment. Older 1950s-1980s homes often need decking replaced to meet sheathing code, and that’s a line item you should see before the permit is pulled. Our quotes include the code-required upgrades, priced in writing, not discovered mid-job and added after.
Highland sits in a wind corridor off the Cajon Pass, and Santa Ana events push gusts over 60 mph through the east side. Those winds lift shingles at ridges and gable ends, crease tabs, and tear underlayment at the eave line. Rain damage is secondary; wind uplift and ember intrusion from wildland fires are what actually end the life of a Highland roof.
Start with a structural verification, because many 2000s Highland homes with concrete tile were never confirmed for the tile weight load. We inspect the truss condition, check for cracked underlayment under the tile, and then give you options, including converting to architectural shingles with a wind-rated assembly if the structure won’t support tile. Call (877) 731-1384 and we’ll document what’s actually under the tile before any replacement decision.
Highland’s wildland-urban interface zones and the fall fire season make Class A fire-rated assemblies standard practice for us, even where code may not explicitly require them. Ember-resistant vents and Class A underlayment protect against what Highland actually faces: wind-driven ember intrusion during Santa Ana events near the foothills. We install the fire-rated details on every replacement, not just the ones where the permit forces it.
Ready to replace your Highland roof? Call Hawk Roof Repair at (877) 731-1384 for a free, written estimate. We inspect first, scope the work, and price everything in writing before the first shingle comes off.
Written by Noel Ibarra, Owner at Hawk Roof Repair, serving Highland and the Inland Empire with inspection-led roof replacement since day one.