Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Upland
Roof repair in Upland usually runs between $350 and $1,400 for a typical shingle, flashing, or leak job, and most repairs we handle are scoped and quoted the same week. If you’ve spotted a ceiling stain, found granules in your gutters, or watched shingles lift during the last Santa Ana blow, don’t wait. Wind-driven rain gets into openings fast, and small leaks on low-slope 91786 ranch roofs turn into decking rot within a season. Call us at (877) 731-1384 and we’ll put eyes on it, document what we find, and give you a written scope before any work is discussed. That’s how we run every call in Upland.
Why Hawk Roof Repair Is Upland’s Preferred Roof Repair Company
Noel Ibarra built Roof Repair at Hawk around one habit: inspect first, every time, before quoting a dollar amount. Homeowners in Upland call us because they want a straight diagnosis, not a ladder-top sales pitch. We document what’s failing, photograph it, and hand you a written line-item scope. If the repair isn’t urgent, we say so. That’s earned us repeat calls from neighbors in the Colonies, the foothill streets off Euclid, and the older tract blocks south of Foothill Boulevard.
We also bring material choice most roofers in Upland can’t offer. Seven major manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. If your existing roof is a specific CertainTeed color or Atlas profile, we can match it instead of telling you to accept whatever we have in the truck. That matters when you’re repairing a section rather than replacing a whole roof, and it matters even more when you’re trying to preserve the look of a mid-century home in 91786.
Response time to Upland is quick. Our crews stage out of Ontario, so we can typically reach north Upland, the 210 corridor, and the neighborhoods around Memorial Park within 30 to 45 minutes once a visit is scheduled. We’re not promising same-day anything on a planned repair, but we’ll be straight about what needs to happen and when we can get there.
Styles & brands we work with






Metal Roof Repair in Upland
Metal Roof Repair in Upland usually involves resealing seams and fasteners on standing-seam panels, replacing worn closure strips, or repairing flashing at penetrations, with typical jobs running $550 to $1,800 depending on the panel profile and how much trim needs to be pulled. The inland heat here is hard on metal: thermal expansion cycles loosen fasteners over time, and Santa Ana winds catch any panel that’s lost its washer seal and start working it back and forth until the fasteners hog out. What starts as an oil-canning sound ends as a leak over a patio or a workshop.
Fastener and Seam Resealing
Most Upland metal roof problems start at the screw line, not the panel itself. We inspect the gasket washers, torque and replace fasteners where the rubber has cracked, and reseal laps with the correct sealant for the metal type. Do not let someone slather silicone over everything and call it done. That fails in two summers and ruins any future repair.
Flashing on Detached Shops and ADUs
If you’re on an acreage property in 91784 with a detached metal-roofed shop or a converted ADU, the roof-to-wall flashing where the structure meets the main slope is the common failure point. Wind drives rain sideways against those junctions, and open-lot grading can channel water toward the building. We inspect the counter-flashing, apron flashing, and transitions to gutters, then quote the repair as a line item.
If you need metal roof repair in Upland, call (877) 731-1384 for a free estimate. We’ll tell you what can be repaired versus what’s reached the end of its service life.
Commercial Roof Repair in Upland
Commercial Roof Repair in Upland for low-slope and metal buildings typically runs $900 to $4,500, depending on the size of the affected area, accessibility, and whether the roof system is an older built-up roof, a modified bitumen system, or a metal standing-seam. Upland has a lot of small commercial buildings along Foothill Boulevard, Euclid Avenue, and the 210-adjacent industrial pockets, and many of them were built in the same decades as the residential tracts. The roofs are aging together.
Low-Slope Patch and Penetration Repair
On flat and low-slope commercial buildings, leaks almost always trace back to a penetration: an HVAC curb, a vent pipe, a drain bowl, or a conduit rack someone added years ago without re-flashing properly. We cut back the failed membrane, inspect the substrate for saturated insulation, install new flashing, and seam it into the existing system. If the membrane is brittle or blistered beyond a local patch, we’ll tell you that too, and scope only what’s needed.
Access and Long Material Hauls
If your commercial building sits on the edge of the foothills or on a large lot off a private road, equipment access and material staging change the quote. We account for crane lifts, scissor lifts, and how far materials have to be moved by hand. Those costs get line-itemed before we start. No surprises after the fact.
We Also Serve Cities Near Upland
Hawk regularly handles roof repair for homeowners in Upland as well as San Antonio Heights, Claremont, Montclair, and Rancho Cucamonga. If you’re a few blocks over the city line, the permitting and access details may change slightly, but the inspection-first process doesn’t. Call us and we’ll sort out what applies to your property.
Trusted Brands We Service in Upland
Because we’re not locked into one manufacturer, we repair what’s actually on your roof, not what’s easiest for us to stock. That means real choice: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. If your Upland home has Atlas shingles and we need to replaced a damaged slope, we’ll match the Atlas color and profile instead of telling you the whole roof has to go. We keep fast-moving stock and can source the rest quickly from regional suppliers. The right material for your roof, not the one we happen to stock.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Upland Homes
- Wind uplift on original ridge vents and end-cap tile. After a Santa Ana event, the calls cluster along the foothill-facing streets and older north-side tract blocks of 91786. The original ridge vents and end caps, many never touched since the home was built, are the first things to blow loose or tear away entirely.
- UV-baked underlayment and flashing on low-slope ranch roofs. Upland’s long hot summers dry out asphalt shingles fast. They curl, lose granules, and the underlayment underneath gets brittle. Once that underlayment cracks, the roof leaks without the shingles looking obviously failed.
- Water intrusion at valleys and penetrations. We see a lot of failed valley metal and pipe-boot gaskets on homes in the 91786 core, especially on the original shallow-pitch tract roofs where water moves slowly and sits on the valley centerline long after the rain stops.
- Flashing and drainage problems on detached outbuildings and ADUs. On acreage lots and open-graded properties, water that isn’t directed away from a shop, barn, or converted ADU finds its way under the sill flashing or through the roof-to-wall junction. These repairs often require attention to the surrounding grade, not just the roof surface.
Pricing for Roof Repair in Upland, CA
Here’s what we quote in Upland on a typical basis: a small shingle replacement (one or two bundles plus felt) runs $350 to $600. Leak repair with flashing work is $500 to $1,000. Valley replacement and re-flashing goes $800 to $1,500. Vent boot replacement is $250 to $400. Flat roof patch work is $700 to $1,400. Metal seam resealing runs $550 to $1,800. A full roof inspection report with photos and measurements is a standalone service, not a freebie or a sales hook.
What changes the price: roof accessibility, the pitch, whether the decking under the shingles is rotted and needs replacement, and whether we’re dealing with original skip-sheathing on an older 91786 home. We quote the decking as a per-sheet line item so you see exactly what’s covered before we start. Every estimate is written and free. Call (877) 731-1384 to schedule yours.
Building on Acreage: How Upland’s County-Side Properties Change the Job
Upland isn’t all tract homes and foothill subdivisions. A meaningful portion of the city, especially the 91784 pockets north of the 210 and up against the San Gabriels, functions more like acreage county property than a neat rectangular lot. If you’re repairing a roof on one of those properties, the scope changes in ways a generic roofing page never covers.
First, permitting. A straight reroof or structural repair on a primary residence in Upland goes through the city. But if the building is a detached outbuilding, a barn, a shop, or a converted ADU on a larger parcel, you may be looking at county-level review for structural changes, or at minimum a permit-trigger inspection if the decking or trusses get touched. We don’t guess on this. We check before we quote, and we note which permits apply in the written scope.
Second, drainage. Open-lot grading around Upland acreage homes tends to be subtle, usually a gentle fall from the house toward a swale or a dry well. Most callers never think about it. But if water has been sheeting off the roof and pooling against a shop wall or an ADU foundation, the repair won’t hold unless the grade is corrected. We’ll flag it, and we’ll quote the grading or drainage component separately when it’s outside the roofing scope, so you’re not surprised by a mixed-trade bill after the fact.
Third, material haul and access. Long driveways, tight gates, switchbacks on foothill lots, or a detached structure set 100 feet back from the road all change how we stage materials and how long the job takes. We price those logistics honestly. A 40-square reroof on a hillside lot with no direct truck access costs more than the same roof on a 91786 cul-de-sac, and you deserve to know why in writing before you commit.
Noel Ibarra has scoped enough of these Upland acreage properties to know which questions matter before the first shingle comes off: What’s the actual building classification? Is it permitted as an ADU or is it an unpermitted conversion? Where does the water go after it leaves the downspout? Is the decking on spaced plank or solid sheathing? We answer those, then give you a price.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Upland
Yes, in many cases, especially if the repair involves structural components like decking, trusses, or sheathing replacement on a detached structure or an ADU on a larger parcel. The city of Upland handles permits for primary residences within city limits. A straight shingle overlay or minor flashing repair on your main house usually does not trigger a permit. For outbuildings and ADUs, the classification of the structure matters, and we verify permit requirements as part of the written estimate. Call (877) 731-1384 and we’ll tell you what applies to your specific building.
It determines whether a roof repair will last. If the grade around your foundation, shop, or ADU slopes toward the structure, water from the roof accumulates at the wall line and undermines flashing, stucco, and sill plates over time. We inspect the ground-level drainage as part of every repair quote on acreage or open-lot properties. When grading is the real problem, we say so and scope it separately. It’s not an upsell; it’s the reason the last repair failed.
Because the original ridge vents and end-cap tiles on many 1940s-1970s tract homes in 91786 were installed with small fasteners, shallow embedment, and no wind-rated upgrade, and the Santa Ana winds that funnel down the San Gabriel canyon mouths hit those ridge lines directly. Over decades, the mortar beds on end caps crack, the fasteners rust, and the whole assembly loosens. Then one strong wind event rips them off. We re-secure with wind-rated fasteners and, when appropriate, upgrade the ridge vent to a modern system like a GAF Cobra ridge vent. We were called to a 1950s ranch on the north side of 91786 after a Santa Ana wind event stripped the original ridge vent and several end-cap tiles. Our crew replaced the ridge vent with a GAF Cobra ridge vent, installed new drip edge and ice and water shield at the vulnerable valleys, and re-secured the end caps with wind-rated fasteners; the homeowner reported no further issues through the next wind season.
Yes. We handle standing-seam metal roof repair on commercial buildings throughout Upland, including sites on the north side where driveways are long, access roads are private, and material has to be staged off-site and walked or lifted in. We quote the access and hauling labor as a line item so you’re not paying for obscured costs. The repair itself, fastener replacement, seam resealing, flashing correction, uses the same process whether the building is 500 square feet or 15,000.
Ask for a written, line-item scope from each contractor, and do not accept a one-line quote that just says “repair roof.” A honest quote tells you exactly which slopes, flashings, penetrations, or decking sections are involved, what materials will be used, whether permits are needed, and what happens if hidden damage is found after the roof is opened. Our estimates are free, written, and specific. Call (877) 731-1384 to schedule yours, and we’ll walk you through exactly what we found and why each line item is there.
Written by Noel Ibarra, Owner at Hawk Roof Repair, serving Upland and the surrounding foothill communities.